Making Calls; Accept / Reject Calls - Silvercrest SFA 4.1 C2 Bedienungsanleitung Und Sicherheitshinweise

You may need to confirm the connection on your mobile phone. If a third known device now comes in the vicinity of
the hands-free kit, the connection to it is blocked until one of the two active connections is interrupted or one of the two
devices leaves the transmission range. If one of the two active connected devices is no longer paired, pairing is
possible for the third (waiting) device.
The pairing process can take up to 30 seconds depending on the mobile phone which is used.
If two devices are connected to the hands-free kit, different ring tones will be used for incoming calls.

Making calls

If you want to make a call, dial the phone number as usual on your mobile phone. The LED indicator (4) rapidly
flashes blue when the telephone connection is established. Once the telephone connection is established, the LED
indicator (4) flashes blue once followed by a long pause.

Accept / reject calls


The hands-free kit rings for an incoming call. The LED indicator (4) rapidly flashes blue when the telephone
connection is established. Answer the call by briefly pressing the multifunction button (2). Once the telephone
connection is established, the LED indicator (4) flashes blue once followed by a long pause. If the
multifunction button (2) is pressed for approx. two seconds, the call can be transferred to the mobile phone.
The call can then also be subsequently retrieved in the same manner.

To reject the call, press the multifunction button (2) for approx. 2 seconds until a beep sounds.
SilverCrest SFA 4.1 C2
English - 17