Making Calls - Silvercrest SBTF 10 F2 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SBTF 10 F2
The number of devices that can establish an active connection with the hands-free kit is
limited to two. The second device must be connected within 5 minutes of the first device. A
connection can then be re-established automatically with the second device when the
hands-free kit is switched off and on again. If one or two of the known devices enter the
vicinity of the hands-free kit within approx. 5 minutes, a connection to these devices will be
established automatically. You may need to confirm the connection on your mobile phone.
If a third known device enters the vicinity of the hands-free kit, the connection with this
device will be blocked as long as there are two active connections or until one of the two
devices goes out of range. If one of the two actively connected devices disconnects, pairing
is possible for the third (waiting) device once the hands-free kit is restarted.
The pairing process can take up to 30 seconds depending on the mobile phone
you are using.
If two devices are connected to the hands-free kit, the ring tone of the respective
mobile phone will be used for incoming calls. If the mobile phone does not
support this function, an internal ringing tone of the hands-free kit is alternatively
used. A call to a second paired phone will be signalled by the hands-free kit if
you are on another call.

9.4 Making calls

To make a call, select the phone number on your mobile phone in the normal way. While
the connection is being established, the phone button (4) flashes blue about once every
104 - English