FLORABEST HG04678 Bedienungs- Und Sicherheitshinweise Seite 18

2. Use the rotary button to set
the program number (e.
g. Prog 3) and confirm by
pressing the SET button
(see Fig. 6).
The hour display on the
"Start" section will flash
on screen.
3. Set the hours for starting the
watering time with the rotary
control
5
confirm with the SET button
(see Fig. 7).
The minute display on the
"Start" section will flash on
screen.
4. Set the minutes for starting
the watering time with the ro-
tary control
nutes) and confirm with the
SET button
The hour display on the
"Run Time" section will
flash on screen.
5. Set the hour for the watering
time and confirm with the SET
button (see Fig. 9).
4
The minute display on the
"Run Time" section will
flash on screen.
18 GB/IE/NI
4
(e. g. 6 hours) and
(e. g. 20 mi-
5
(see Fig. 8).
4
6. Set the minutes for the wa-
tering time and confirm with
the SET button
The cursor of the "wate-
ring frequency" section
will flash on screen.
The watering frequency
can be selected by:
The watering cycle (right
hand column of the display),
see step 7.
4
or
The watering days (left
hand column of the display),
see step 8.
7. Select the watering cycle
with the rotary button (e. g.
2nd) and confirm by pressing
the SET button
Remark: 24h / 2nd / 3rd /
4th / 5th / 6th / 7th means:
Watering every 24 hours /
every 2 / 3 / 4 / 5 / 6 / 7
days.
The week preview will be
displayed in the left hand
column.
The display on the "Prog"
will flash on screen.
(see Fig. 10).
4
(see Fig. 10).
4