How To Remove Remaining Paper Roll - Citizen CBM-270 Bedienungsanleitung

5) After the paper is set, the printer is made ready to start printing.
the printer will start printing after the paper is set.
6) Do not run the printer with its cover removed, because it could cause malfunctioning or an irregularity of the
sensor.
4.4

How to Remove Remaining Paper Roll

1. Remove the printer cover.
2. Raise the head-up lever.
3. Gently pull out the paper to the near side.
insertion slot before pulling it out.
CAUTION:
1) Do not pull out the paper roll in the opposite direction.
2) If you do so with the label paper, the labels may come off.
3) Never take out paper with the head-up lever lowered, because it could damage the printing head.
4) The printer mechanism may be very hot just after printing, so be duly careful.
Note that if data is remaining in the buffer,
If the paper roll is still remaining, cut it just before the paper
11
CBM-270 User's Manual
CITIZEN