Inhaltsverzeichnis
Werbung
GS
<
[Function]
Initializing the printer mechanism
[Code]
<1D>H<3C>H
[Outline]
This command initializes the printer mechanism.
[Caution]
This command is valid only when the label printer is selected with DS1-5.
one label for scanning, a head search starts from the next label.
and label spacing (Black mark) is 300 mm.
error.
GS
A
m
[Function]
Correctting the label top position
[Code]
<1D>H<41>H<m><n>
0 ≤ m ≤ 255, 0 ≤ n ≤ 10
[Range]
[Outline]
This command sets the label head search position in terms of correction value for the default
position.
n denotes a correction value; it is set in increments of n/203 inch.
[Caution]
This command is valid only when the label printer is selected with DS1-5.
value remains valid until it is re-set with this command or the power is turned on again.
Any setting beyond the range is ignored.
n
m denotes the correcting direction and valid only for the least significant bit (m0).
m 0
Correcting direction
0
Corrects in the forward direction
1
Corrects in the reverse direction
(Only When Label Printer is Selected)
Any label exceeding this limit results in an
(Only When Label Printer is Selected)
72
CBM-270 User's Manual
Since it uses
The maximum label length
The correction
CITIZEN
Werbung
Inhaltsverzeichnis
