Inhaltsverzeichnis
Werbung
4.
OPERATION
4.1
Connecting AC Adapter
1. Turn off the power.
2. Connect the cable connector of the AC adapter to the power connector located on the back of the printer.
3. Connect the AC power cord of the AC adapter, and plug it into a socket.
CAUTION:
1) Use only the specified AC adapter.
2) When disconnecting/reconnecting the cable connector of the AC adapter, be sure to hold the connector.
3) Separate the AC adapter from other noise-generating devices.
4) Pulling the AC power cord may damage it, resulting in a fire, electric shock, or snapping.
5) If a thunder/lightning storm is nearby, disconnect the AC adapter from the socket and do not use the printer,
because a fire or electric shock may occur.
6) Do not put the AC power cord close to a heating device.
shock.
7) Install the printer in a well-ventilated place, because the AC adapter generates heat when it is used.
8) Use the specified AC power source.
is insufficient, a fire may result from heat generation.
9) After using the printer or when not using it for a long period of time, be sure to unplug the AC adapter from
a plug socket for your safety.
Its coating can melt and cause a fire or electric
Connect to a power source with sufficient capacity.
8
CBM-270 User's Manual
If the capacity
CITIZEN
Werbung
Inhaltsverzeichnis
