Citizen CBM-270 Bedienungsanleitung Seite 81

DC2 A n
[Function] Selecting a printing speed
[Code] <12>H<41>H<n>
0 ≤ n ≤ 1
[Range]
[Outline] This command specifies a printing command. n is valid only for the least significant bit.
[Caution] If a printing amount is too much for one line, a standard speed will be assumed.
printout and download bit image printout are automatically done at a standard speed.
high-speed printout, printing quality may be deteriorated.
[Default] n = 1
DC3 n
[Function] Switching the Red/Black printing
[Code] <13>H<n>
0 ≤ n ≤ 255
[Range]
[Outline] This command selects/deselects black/red printout. n is valid only for the least significant
bit (n0).
When deselected
When selected
[Caution] This command is valid only at the beginning of the line.
paper is used.
[Default] n = 0
[Sample Program]
LPRINT "ABCDEFG" ;CHR$ (&HA) ;
LPRINT CHR$ (&H13) ; CHR& (1) ;
LPRINT "ABCDEFG" CHR& (&HA) ;
END
[Print Result]
When the normal thermal paper is used
When the special purpose paper is used
n0 Printing Speed
0 Standard print
1 High-speed print
n0 Black based paper
0 Deselects red printout
1 Selects red printout
: Assumes a standard power-on pulse rate
: Increases a power-on pulse rate to change coloring.
Printing color becomes thicker on normal thermal paper.
n0
0
1
Black print
Red print
Standard print
High-temperature print
66
CBM-270 User's Manual
Red based paper
Deselects black printout
Selects black printout
It functions when special purpose
Bar code
At
CITIZEN