Inhaltsverzeichnis
Werbung
GS
C2
n1
[Function]
Setting the numbering counter
[Code]
<1D>H<43>H<3B>H<N1><3B>H<N2><3B>H<N3><3B>H<N4><3B>H
<N5><3B>H
<1D>H<43>H<32>H<n1><n2>
0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255
[Range]
[Outline]
This command sets the numbering (serial number counter) value.
[Caution]
If the counter is set with this command, a repeat count of the identical counter will be cleared.
If the counter value is beyond the Range specified with the "GS C1" or "GS C;" command,
the counter will be initialized.
[Default]
Not defined.
[See Also]
GS
[Sample Program]
See the sample program and print result for the GS C1 command on Page 69.
GS
C;
N1;
[Function]
Setting the numbering counter mode (B)
[Code]
<1D>H<43>H<3B>H<N1><3B>H<N2><3B>H<N3><3B>H<N4><3B>H
<N5><3B>H
<N1>, <N2>, <N3>, <N4>, and <N5> are character codes.
0 ≤ N1, N2, N5 ≤ 65535 0
[Range]
[Outline]
This command sets the numbering (serial number counter) mode and a counter value.
n2
×
n1 + n2
256 (n1 = remainder, n2 = quotient) becomes a counter value.
C0,
GS
C1,
GS
N2;
N3;
N1
N2
N3
N4
N5
N1<N2
N1>N2
N1 = N2
or
N3 = 0
or
N4 = 0
c,
GS
C ;
[Print Result]
N4;
N5;
≤ N3, N4 ≤ 255
: Counter default
: Counter final value
: Counter step value
: Identical counter print count
: Counter start value
: Count-up system
: Count-down system
: Counter stop
70
CBM-270 User's Manual
CITIZEN
Werbung
Inhaltsverzeichnis
