Inhaltsverzeichnis
Werbung
4.2
Connecting Interface Cable
1. Turn off the power.
2. Check the top and bottom of cable terminals, and connect to the interface connector.
3. Fix the cable terminals.
4. Connect the cable to the host computer.
CAUTION:
1) Referring to "6. PARALLEL INTERFACE" and "7. SERIAL INTERFACE," check the pin configuration of
the interface connector and cable.
printer body but also the host computer.
2) When disconnecting/reconnecting the interface cable, be sure to hold the connector.
itself may snap the internal wires.
3) Connect the interface cable securely.
failure.
(Mating side included)
Serial interface
Parallel interface
Wrong wiring could cause trouble or malfunctioning to not only the
Otherwise, communications may not be obtained due to a connection
: Tighten screws, to fix it.
: Turn a stopper, to fix it.
9
CBM-270 User's Manual
Pulling the cable
CITIZEN
Werbung
Inhaltsverzeichnis
