Safety Notes; Installation Instructions; Flow Diagram - HANSGROHE Talis Classic Gebrauchsanleitung, Montageanleitung

6

Safety Notes

6 Gloves should be worn during installation to prevent
crushing and cutting injuries.
6 The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6 The hot and cold supplies must be of equal pressu-
res.

Installation Instructions

• The fitting must be installed, flushed and tested after
the valid norms.
• The EcoSmart® (95311000) in the adapter bottom
can be removed if there are problems with the flow
heater or when more water flow is required.
Technical Data
This mixer series-produced with EcoSmart®
(flow limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
4
English
Symbol description
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 32
Adjustment
To adjust the hot water limiter on single lever
mixers, please see page 36. No adjustment
is necessary when using a continuous flow
water heater.
Do not use silicone containing acetic acid!
Dimensions (see page 31)

Flow diagram

(see page 31)

with EcoSmart®

without EcoSmart®
Spare parts (see page 37)
XXX = Colors
000 = chrome plated
820 = brushed nickel
Special accessories
special tool (58085000) order as an extra
Installation putty order as an extra
Operation (see page 34)
Cleaning (see page 35)
and enclosed brochure
Test certificate (see page 38)