Safety Notes; Installation Instructions; Technical Data; Symbol Description - HANSGROHE Ecostat E 15707 Serie Gebrauchsanleitung, Montageanleitung

�

Safety Notes

� Gloves should be worn during installation to prevent
crushing and cutting injuries.
� The product may only be used for bathing, hygienic
and body cleaning purposes.
� Children as well as adults with physical, mental and/
or sensoric impairments must not use this product
without proper supervision. Persons under the
influence of alcohol or drugs are prohibited from
using this product.
� The hot and cold supplies must be of equal
pressures.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Thermal disinfection:
• Safety against backflow
• The product is exclusively designed for drinking
water!
6
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 60°C
70°C / 4 min
English

Symbol description

Do not use silicone containing acetic acid!
Adjustment (see page 66)
After the installation, the output temperature of the
thermostat must be checked. A correction is necessary if
the temperature measured at the output differs from the
temperature set on the thermostat.
Safety Function (see page 66)
The desired maximum temperature for example max.
42º C can be pre-set thanks to the safety function.
Maintenance (see page 68)
• The check valves must be checked regularly
according to EN 806-5 in accordance with national
or regional regulations (at least once a year).
• To guarantee the smooth running of the thermostat, it
is necessary from time to time to turn the thermostat
from total hot to total cold.
Dimensions (see page 71)
Flow diagram (see page 71)
free flow
Spare parts (see page 72)
XXX = Colors
000 = Chrome Plated
250 = Brushed Gold-Optic
300 = Polished Redgold
+
Special accessories (see page 73)
order as an extra
• extension 22 mm #13593000
• extension 22 mm #13597XXX
• extension 22 mm #15597XXX
• extension 25 mm #13595000
Test certificate (see page 80)
Cleaning (see page 74)
Operation (see page 65)