Stopping The Machine - GOLDONI EURO series Bedienung Und Instandhaltung

Gearbox
Gears
1st
Wheels
7.50-16 (4) 1,1
8.25-16 (4) 1,2
260/70 R16 1,1
(4)
29x12.5-15 1,1
(4)
260/80R20 1,4
(5)
(8) Mod. 30SN-40SN-30A-40A
(9) Mod. 45SN-45A
The thrust bearing will quickly wear if the clutch remains disengaged for too
long.

4.6 STOPPING THE MACHINE

a) Move the accelerator lever up (N° 18 fig.1), to the idling position.
b) Depress the clutch pedal (N° 19 fig.1).
c) Move the gearshift lever (N° 16 fig.1) and the reduction gear – reverse shuttle
lever (N° 17 fig.1) to the neutral position.
d) Engage the parking brake (N° 6 fig.1).
SPEED TABLE
In kph – with a 2800 RPM engine rate
(The values are indicative)
Low
2nd 3rd 4th
2,4 3,6 6,1
2,5 3,7 6,3
2,3 3,4 5,9
2,2 3,3 5,6
2,8 4,3 7,3
High
5th 6th
12,7 19,1
13,2 19,8
12,1 18,3
11,8 17,7
15,2 22,9
91
Reverse
1st 2nd 3rd
1,5 3,1 4,7
1,5 3,2 4,8
1,5 3,0 4,5
1,4 2,9 4,4
1,8 3,7 5,6