Seat; Wheels; Ballasting With Water - GOLDONI EURO series Bedienung Und Instandhaltung

5.5 SEAT

Adjust the seat distance if necessary (using lever N° 15 fig.1). A soft or rigid seat
suspension can be obtained by means of knob N° 10 fig.1.
EEC approved seats can be adjusted in the following way:
• Lever 9 fig.1 – seat height adjustment.
• Lever 11 fig.1 – seat suspension adjustment carried out according to the
driver's weight: less than 70 Kg; more than 70 Kg.

5.6 WHEELS

Tyre
7.50 - 16 (1)
7.5L - 15 (1)
8.25-16 (2) (4)
260/70 R16 (3)
29x12.5 - 15 (1) (3)
260/80-20 (4)
Wheel
7.50 - 16 (1)
7.5L - 15 (1)
8.25- 16 (2)
8.25- 16 (4)
7.50 - 16 (3)
8.25- 16 (3)
260/70 R16 (3)
260/70 R16 (4)
260/80 – 20 (4)
29x12.5 - 15 (1)
29x12.5 - 15 (3)
(9) Mod.26RS-30RS-40RS-W40RS-40R
(10) Mod.45RS-W45RS-45R
(11) Mod.30SN-40SN-30A-40A
(12) Mod.45SN-40A

5.6.1 Ballasting with water

Jack up the wheel and move the valve to the top. Slacken off the valve fixing nut
and remove the mobile part from it by means of the cap of the valve itself. Now
deflate the wheel.
Connect the valve to a water tap and gradually fill the tyre, stopping every so
often to allow any air to escape.
TYRE INFLATION PRESSURES
Front
Bar
1,8
3,7
1,3
2,4
1,4
1,6
TRACK WIDTHS
Track width
Mm
890 – 990
890 – 990
1010 - 1184
786 – 1076
754 – 854
786 – 1038
846 – 932
818-1044
818 - 1036
1017
880
102
Rear
KPa Bar
180 1,6
370 3,0
130 1,2
240 2,2
140 1,3
160 1,6
External wheel dim.
1098 – 1198
1098 – 1190
1240 – 1414
1000 – 1076
962 – 1062
998 – 1250
1104 – 1190
1076-1302
1076 - 1294
1342
1205
KPa
160
300
120
220
130
160
Mm