Panasonic AK-HC1500G Benutzerinformationen Seite 42

Setting of menu items
 SETTING menu
[3] GEN-LOCK
���� ��
GEN-LOCK
GEN-LOCK INPUT
H PHASE-COARSE
H PHASE-FINE
SD HD PHASE CRS
SD HD PHASE FINE
[4] PIX DEFECT
����
PIX DEFECT
AUTO DETECTION
R
G
B
Y
:BNC
:+00
:+000
:+0
:+00
��
:READY
CNT
1
5
2
1
GEN-LOCK INPUT [BNC, DSUB]
For selecting whether the sync signals are to
be input from the BNC or D-SUB connector.
H PHASE-COARSE
[–40 to +40 (720 mode)]
[–60 to +60 (1080 mode)]
For roughly adjusting the horizontal phase.
H PHASE-FINE [–45 to +45]
For finely adjusting the horizontal phase.
SD  HD PHASE CRS [–4 to +4]
For roughly adjusting the phase of the HD
video signals when SD sync signals have been
input.
SD  HD PHASE FINE [–99 to +99]
For finely adjusting the phase of the HD video
signals when SD sync signals have been input.
AUTO DETECTION
When ACTIVE is selected, automatic defect
compensation processing* is performed, and
when this processing is completed, the status
returns to READY.
* Execute automatic defect compensation
processing after supplying the power to the
camera at the normal temperature for at least
two hours.
- 41 (E) -