Canon imageRunner C1028iF Handbuch Für Starter Seite 13

For screens that require alphanumeric entries.
–
Press [ ▼ ] [ ▲ ] [ ◀ ] [ ▶ ] and
<A/1>: Alphanumeric character entry mode
<Sym>: Symbol entry mode
–
Press [OK] to enter the highlighted character or space and to determine the entry mode.
–
You can also use -
–
Select <Backspace> by pressing the left Any key to clear the entered characters one by one.
–
Select <Set> by pressing the right Any key to complete the entry and return to the previous screen.
The display returns to the Standby mode:
●
The machine may enter the Standby mode (Auto Clear function) while you are setting it up. Make the setting again from the main menu. The default setting is 2 minutes.
To change the settings, see "Introduction of the Machine" in the e-Manual.
The display turned OFF:
●
The machine may enter the Sleep mode while you are performing setup. Press
15 minutes. To change the settings, see "Introduction of the Machine" in the e-Manual.
1
Press (Main Menu).
2
Press the right Any key to select <Additional
Func.>.
3
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select
<Communications Settings>, then press [OK].
(Scroll Wheel) to move the highlighted cursor position.
(numeric keys) to enter numbers.
(Power) to turn the display back ON and continue the setup. The default setting is
4
Use [ ▼ ], [ ▲ ] or
<Fax Settings>, then press [OK].
5
Use [ ▼ ], [ ▲ ] or
<User Settings>, then press [OK].
2 Set Up the Machine
(Scroll Wheel) to select
(Scroll Wheel) to select
11