Usb Connection; Installation Procedure - Canon imageRunner C1028iF Handbuch Für Starter

USB Connection

• The following procedures are explained using sample screens from Windows XP Professional.
• Do not connect the USB cable before installing the software. If you connect the USB cable
before installing the software and the Found New Hardware Wizard screen appears, click
[Cancel].
• Log on as Administrator to install the software.
• Make sure the machine is turned ON before connecting the USB cable.
• Click on the circled button on each screen to proceed to the next step.
• A USB cable is not included with the machine.
Installation Procedure
1
Insert the UFRII LT/FAX User
Software CD-ROM.
–
If you want to install only the
PCL Driver, proceed to step 28.
For more information refer to
the Printer Driver Installation
Guide (located on the PCL User
Software CD-ROM).
–
If you want to install only the PS
Driver (when the optional PS
Printer Kit is attached), proceed
to step 28. For more information
refer to the Printer Driver
Installation Guide (located on
the PS User Software CD-ROM).
Before Installation
–
If you want to install the PCL/PS
driver by connecting the USB
cable (plug and play), it is
necessary to change the
settings of the machine. Press
(Main Menu) →
<Additional Func.> → <System
Management Set.>* → <PDL
Selection (PnP)> → <Done> →
<PCL5c>/<PCL6>/<PS3>
depending on the desired
driver. After changing the
machine settings, install the
driver using the same procedure
as for the UFR II Printer Driver.
(See steps 6 to 11.).
* If the screen appears prompting
you to enter the System
Manager ID and System
Password, enter the System
Manager ID and System
Password using - (numeric
keys), then press (Log In/
Out). For details, see "Security, "
in the e-Manual.
3 Set up Computers and Software
2
If the CD-ROM Setup screen is not
displayed, click [start] on the
Windows task bar → [My Computer].
Windows 2000: double-click [My
Computer] on the Windows
desktop.
Windows Vista/7/Server 2003/Server
2008: click [Start] on the Windows
task bar → [Computer] ([My
Computer]).
Open the CD-ROM icon, then
double-click [MInst] ([MInst.exe]).
If a language selection screen is
displayed before the CD-ROM
Setup screen, select a language
and then click [Next].
35