Siemens FUT1010 IP65 NEMA 4X Betriebsanleitung Seite 19

3. Check the condition of any pressure taps or Thermowell ports that may be provided with
4. User must verify that fluid is compatible with construction of Sensor material.
5. It is the responsibility of the user to avoid excessive corrosion, erosion or chemical attack
FUT1010 IP65 NEMA 4X & IP66 NEMA 7 Gas Quick Start
Operating Instructions, 1/2013, A5E02639183-AC
the Sensor. Install block valves, Thermowell, or plugs as necessary.
WARNING
Sensor Failure
Sensor ports that are not properly sealed create the potential for injury.
User is responsible for ensuring that all Sensor ports are properly sealed.
WARNING
Misuse of Equipment
It is the responsibility of the user to account for any potential confusion or misuse of gas
equipment with liquid equipment or visa versa.
Restrict use and repair to qualified personnel.
WARNING
Chemical Compatibility
If chemical compatibility of materials is ignored the potential for injury exists.
Materials of construction are chosen based on their chemical compatibility (or inertness)
for general purposes. For exposure to specific environments, check with chemical
compatibility charts before installing.
WARNING
Sensor Failure
Sensors have been designed to account for loads to internal pressures in accordance
with ASME codes. If ignored the potential for injury exists.
It is the responsibility of the user to access and account for other externally applied
loads due to earthquakes, pipe movement and other environmental conditions.
due to the use of incompatible fluids or severe conditions.
Install/mounting
2.4 Sensor Installation Procedure
17