Remote control
With telephone is possible to remotely activate the day tempera-
ture operating mode. For analogue telephone line device G1-D is
available.
Room unit locking
Hold key
for 15 seconds. Release the key after you hear a
beep. Symbol
again hold key
Setting or modifying the parameters by locked DD2+ isn't possible or is
limited.
i
DD2+ locking is set in service group S1.4 (page 20).
One time manual d. h. w. warming activation
Hold key
for 5 seconds. Release the key after you hear a beep.
i
One time manual domestic hot warming is automatically
deactivated, when requested d. h. w. temperature is reached
or at the latest after 1 hour.
Indication of the controlled devices on display
If the indication of controlled devices is deactivated (setting in pro-
gram group P1.8), the currently controlled devices can be viewed
by holding the key
All the controlled devices will appear on the display for 15 seconds.
USER MANUAL
indicates locked room unit. To unlock the DD2+,
for 15 seconds.
and pressing the key
14
(Escape).