Operating Mode Selection - OEG DD2+ Handbuch

Operating mode selection

Heating activation
Press key to select the requ-
ested operating mode (Picture 2).
Selected operation mode is indi-
cated on display.
- room heating

- room cooling
- domestic hot water warming
- Room heating and domestic hot water warming operates according to
the program timer of heating controller.
- This setting has no affect, if room unit DD2+ is connected to WHMS
controller and it is NOT set to control the heating circuit.
Stand-by
Press key (Picture 3). On the
display appears symbol
Frost protection remains active.
i
Frost protection temperature is 6 °C and can be changed in
program group P1.3 (page 18).
USER MANUAL
Picture 2
.
Picture 3
10