Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.4 Functions of the system menu
The following general settings can be made by means of the system
menu (fig . 7) . Use the button MENU (4) to call up the menu and the
button EXIT (4) to exit the menu . Press the button MENU repeatedly
to select a menu item .
5.4.1 Saving configurations
Unless a specific switch-on preset is defined (
settings made at the DSP-26 will remain in force after switch-off . In
addition, it is possible to save various configurations as a "preset" at
the unit: The settings made by means of the menu for the inputs and
outputs as well as any muting of the outputs will be saved .
The configurations saved at the unit can also be used when the
DSP-26 is operated by remote control from the computer (
ter 6 .3 .2 ., UNIT PRESETS) .
To save a preset:
1) Call up the menu item
2) Use the rotary knob SELECT/ ENTER (3) to select a storage location
and then press the button to confirm . If you do not want to over-
write a saved configuration, select a free storage location (
Set Presetname:
Note: Depending on the access rights of the current access level, the storage
function may be locked generally or for a defined storage location
range (
☞
chapters 6 .4 and 6 .9) .
3) Enter a name for the preset or, if required, change the existing
name:
– Use the rotary knob SELECT/ ENTER to select a character (upper-
case letter, lowercase letter, digit or special character) .
– Press the rotary knob to go to the next character .
– Use the button EXIT to go to the previous character position .
To delete the entire entry, go to the first character position and
press the button EXIT .
– Use the button MENU to confirm the final character of the name
and to terminate the entry .
Note: To overwrite characters you may have accidentally entered at the end
of a preset name, use the blank character . It can be found after the
lowercase letters, following the character "}" .
4) The following message will appear on the display:
Save Preset ?
no/YES
To save the preset, press the rotary knob SELECT/ ENTER .
To cancel, rotate the rotary knob SELECT/ ENTER so that the follow-
ing message appears on the display:
Save Preset ?
NO/yes
Then press the knob .
5) When the preset has been saved,
appear on the display .
Load: 1 Basic
EX
M
Save:
3 Empty
EX
M
M
Access Level: Unlocked
EX
M
Version Info
EX
M
Routing: Stereo 1-Way
Fig. 7 Menu structure of the system menu
26
☞
chapter 6 .7), the
.
Save:
will appear on the display .
Preset saved
S
E
Load Preset? no/YES
S
E
Set Presetname:
E
Enter Password
S
**** Locked ****
SN: 0000012345
FW: 3.8.21.31781
S
S
5.4.2 Loading saved configurations
CAUTION Prior to loading a configuration, always check wheth-
that an output configured to control a tweeter becomes the bass
frequency output in a different configuration; tweeters connected
to the output may then be overloaded .
To load a saved configuration:
1) Call up the menu item
2) Use the rotary knob SELECT/ ENTER (3) to select a storage location
and press the knob to confirm .
☞
chap-
3) The following message will appear on the display:
Load Preset ?
NO/yes
To cancel, press the rotary knob SELECT/ ENTER .
To continue loading, rotate the rotary knob SELECT/ ENTER so that
the following message appears on the display:
) .
Empty
Load Preset ?
no/YES
Then press the knob .
While the preset is being loaded, the symbol
the preset name .
5.4.3 Loading configuration suggestions
It is possible to call up a few factory-set configuration suggestions .
Thus, specific channel links and signal assignments by means of the
function MIXER are preset and can be used as a basis for further
settings (example
1) Call up the menu item
2) Use the rotary knob SELECT/ ENTER (3) to select a configuration
suggestion .
3) Exit the system menu .
will briefly
S
E
A
Z
0
9
S
E
EX
...
...
...
A
...
Z
...
0
...
9
S
E
Set Password A
Z
...
...
HW: 2.35.4
S
er the configuration matches the arrangement of the
connected speakers . The DSP-26 offers most flexible
configuration options: thus, it is, for example, possible
Load: .
☞
chapter 6 .13) .
Routing: .
M
Save Preset? no/YES
E
EX
M
0
9
S
E
EX
M
Confirm Password M EX
...
S
M
= MENU
EX
= EXIT
will appear behind
*
S
E
S
= SELECT
E
= ENTER
Werbung
Kapitel
Inhaltsverzeichnis
