Preparations; Speed Settings; Working With The Kneading Hook, Beater And Whisk - Silvercrest SKM 600 A1 Bedienungsanleitung

Preparations

1) Take all the parts out of the box and remove
the packaging material and any protective
wrapping or stickers .
2) Clean all components as described in the
section "Cleaning and care" . Ensure that all
parts are completely dry .
3) Place the appliance on a clean and level
surface and attach it firmly in place with the
suction cups .
4) Insert the power plug into the mains socket .

Speed settings

Level Use
Kneading
1 – 3 hook 0
Beater w
3 – 5
Beater w
Kneading
3 – 4
hook 0
5 – 7
Beater w
7 – 8
Whisk q
SKM 600 A1
suitable for . . .
- Kneading and mixing
of firm dough or
firmer ingredients
- Mixing thick cake
mixture
- Mixing butter and
flour
- Mixing yeast dough
- Mixing shortcrust
pastry
- Kneading yeast
dough
- Kneading thick cake
mixture
- Cake mix
- Whisking butter with
sugar
- Biscuit dough
- Whipped cream
- Egg white
- Mayonnaise
- Whisking butter until
fluffy
Working with the kneading
hook, beater and whisk
WARNING! RISK OF INJURY!
► Never place your hands or fingers in the
mixing bowl 6 during operation! Danger
of injury due to rotating parts!
► Do not change accessories unless the drive is at
a complete standstill! After being switched off,
the drive unit will continue to run for a short time .
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket
to prevent the appliance from being switched
back on unintentionally .
ATTENTION! PROPERTY DAMAGE!
► When working with the kneading hook 0,
whisk q or beater w we recommend allowing
the appliance to cool down after 10 minutes of
operation .
Please proceed as follows to prepare the appli-
ance for operation with the kneading hook 0,
whisk q or beater w:
1) Press the release button 2
arm 1 moves upwards .
2) Insert the mixing bowl 6 in such a way that
the locking tabs on the mixing bowl 6 grip
into the recesses in the base 5 . Turn the
mixing bowl 6 clockwise (see
symbols on the base 5) so that it is locked
and firmly held in place .
3) Select the appropriate attachment 0 q w:
–
The whisk q for whipping cream .
–
The beater w for stirring cake mixture .
–
The kneading hook 0 for kneading heavy
dough such as yeast dough .
4) Depending on what you want to do, attach
the kneading hook 0, whisk q or beater w
to the drive shaft 7:
–
Fit the kneading hook 0, whisk q or
beater w (referred to in the following as
"the attachment") to the drive shaft 7 in
such a way that the two metal pins on the
drive shaft 7 engage in the recesses of the
attachment 0 q w .
. The swivel
and
GB │ IE │ 17 ■