Cleaning And Maintenance - Klarstein Geysir 10033071 Bedienungsanleitung

EN
12

CLEANING AND MAINTENANCE

Cleaning the appliance
This unit must be cleaned thoroughly after each use. This is in addition to a weekly
cleaning using vinegar to remove mineral deposits. If these deposits are not removed,
pitting of the metal can occur and may result in damage to the appliance.
Cleaning after use
• Clean the tank, top cover and the body, etc. and dry them with a soft dry cloth. All
these part are made of stainless steel and can be cleaned with a scouring agent.
• If the appliance is to function properly, the cavity in the middle of the base must be
free of limescale. Use a scale remover if necessary.
• This heater includes an overheat protection system that turns off the heater when
parts of the unit are getting excessively hot.
• To clean the tap, move a brush up and down through the tap, then insert the brush
through opening inside the appliance to clean the tap connection.
• Wash the tap handle in hot soapy water and rinse. Replace the tap.
• Do not use baking soda to clean the appliance as it can discolour and pit the metal.
If the power cable is damaged, appropriate cable must be used, and work carried out
by a competent person.