Control Function 1 Dn 65-100; Control Function 2 / Control Function 3 Dn 65-100 - Gemü 514 Montageanleitung

1Removal
1.1.3 Control function 1 DN 65–100
6
6
30
1. Move the actuator A to the open position.
2. Undo the hexagon nuts 6.
3. Remove the actuator A and seat flange 29 from the valve
body 1.
4. Disconnect the actuator A from the control medium lines.
5. Remove the gasket 30.
GEMÜ 514, 530, 532, 534, 550,
554
1.1.4 Control function 2 / Control function 3 DN 65–100
A
6
6
29
1
10 / 16
6
6
30
6
6
29
A
1
www.gemu-group.com