The System; Using The System; Features And Operation - E&P HYDRAULICS V6A Bedienungsanleitung

The System

E&P's electronic levelling system is an electrically/hydraulically driven system. A hydrau-
lic pump is powered by a 12V direct current motor, which will lead fluid through a system
of pipes, control devices and jacks, so that the camper can be levelled and stabilized.
E&P's jacks have the bearing capacity that your camper requires. Each jack has a 228
mm diameter floor plate on a ball pivot guaranteeing the greatest firmness possible on
any surface. The jacks are controlled by a central 12V direct current motor/pump unit. It
contains the oil tank, control valve distributor and solenoids. E&P's levelling system is
electronically controlled. It can be operated semi-manual or fully automatic. The customer
can freely choose the location of the switching panel. The levelling system of E&P is fully
integrated in the undercarriage of the camper.

Using the system:

1. Park the camper on a surface that is as level as possible.
2. The HAND BRAKE of the camper must be engaged.
3. The transmission must be in a neutral position or in the parking position.
4. When the levelling system is operating, any persons or animals in the camper may
not move, or else the control mechanism levelling the camper will be disrupted.
5. The ignition of the vehicle must be switched on.

Features and operation:

• Automatically extending the jacks from a retracted position.
• Automatically or manually levelling the jacks.
• Automatically retracting the jacks.
• Alarm mode (jacks not retracted and hand brake disengaged).
• Automatic error message jacks and error mode.
• Configuration function for levelling zero point.
54