Bosch WBE 4140 Instandsetzungsanleitung Seite 28

3. How to use the machine
and surfing menu
�.1 Display
i
The initialization of the software is displayed approx.
20 seconds after switching on the WBE 4140. The
start page is displayed after a further 40 seconds.
i
If the image does not appear correctly, carry out self-
calibration of the monitor (making reference to the
monitor user manual).
The following menus can be selected on the start page
Sim- Denomina- Qui si accede al menù
bolo zione
Wheel Balancing program
Balancing
Settings and Personal settings, calibration and
service customer service.
�.2 Control keys
The WBE 4140 is operated by way of the < I > key
and the arrow keys. The corresponding functions are
described in Table 1.
Tasto Descrizione
Arrow keys Navigation in the menus and alteration of the
o r u z rim data values
<I> Confirmation of settings.
Starts measurement.
Ends measurement.
Tab. 1: Funzioni dei tasti comando
Robert Bosch GmbH
How to use the machine and surfing menu | WBE 4140 | 27
�.� Menu navigation
We can divide the balancing machine menu in several
submenus:
Call-up of service menu (customer service only)
Call-up of calibration menu
Press < I > to return to the previous page.
Settings (customer service only)
User-defined settings
i
The following symbols are used in the selection
menus:
Automatic transfer (e.g. time)
Manual transfer (e.g. via pedal)
Function deactivated
�.�.1 Auto-diagnosis
"
Enter the password: <u> <u> <o> to display the
standard diagnostics menu (display only mode);
"
Enter the password <o> <OK> <r>to display the
service diagnostics menu (display only mode).
�.�.2 Calibration
!
Enter the password: <r> <r> <o>.
Calibration with "Go" wheel.
Flange calibration.
Press < I > to return to the previous page.
Vernier caliper and gauge arm calibration.
en
|
1 695 655 779 2010-11-9