SOLIS GELATERIA PRO TOUCH Bedienungsanleitung Seite 54

47. Never clean the ice cream machine with metal sponges. The
metal particles in the sponge could come loose and touch the
electrical components in the appliance, causing electric shock.
For the same reason, no other electric devices must come into
contact with the ice cream machine.
48. Do not place any objects on the appliance.
49. Always unwind the power cord fully before plugging the plug
GB
into the socket.
50. Always turn off the machine by pressing the POWER button
before resetting, disassembling or cleaning the machine. Then,
disconnect the power plug from the outlet and wait until the
motor, the compressor and the stirring tool have come to a
stop. This also applies when the machine is not in use.
51. Use the ice cream machine and stirring tool with caution.
Never reach into the ice cream container or touch the stirring
tool while the machine is in use. While machine is in use, no
body part, hair, clothing or kitchen tool must come in proxim-
ity of the rotating stirring tool.
52. Should any objects (e.g. scraper or kitchen tools) fall into the
ice cream container during use, press the POWER button, un-
plug the machine and remove the object only after motor and
stirring tool have come to a stop.
53. When removing the ice cream and the yogurt from the ice
cream container, turn off the machine with the POWER but-
ton, unplug it and wait until motor, compressor and stirring
tool have come to a stop.
54. Always remove stirring tool before cleaning.
55. Pull the plug after every use. Only then, the appliance is fully
switched off.
106
56. Even when the machine is not in use, the lid should only be
removed for short periods of time.
57. Never store explosive or flammable substances like aerosol
containers (deodorant sprays, hair sprays etc.) in the ice cream
machine.
Important notice concerning the freezing agent
The freezing agent of your ice cream machine consists of Isobu-
tane R600a, a natural gas that is environmentally safe even
though it is flammable. Make especially sure that no components
of the freezing agent circuit are damaged during the transport
and use of the appliance. Fire hazard!
Should the freezing agent circuit be damaged:
– avoid open flames and sources of ignition,
– ventilate the room sufficiently in which the appliance is placed,
– do not start using the appliance again before having it checked
by Solis or a service centre authorised by Solis.
GB
107