Base Settings; Handset Settings - switel E1502 Bedienungsanleitung

1 entry stored of 20 entries in total.
- Add an entry to VIP list/delete from VIP list: Press
ADD TO VIP or DEL FROM VIP and press
Settings

Base settings

1. In idle state press the menu key
2. Select BS SETTINGS and press
3. Select from the options and press
- DELETE HS: enter the PIN of the base station and select the handset
that you want to de-register. You cannot delete the handset you are
using to do this operation. Answer the query with
- DIAL MODE: the standard dialling mode for analogue phones is
"TONE". On some older phone systems the dialling mode must be set
to "PULSE". Please see your phone system's user guide for more
information.
- FLASH TIME: select SHORT, MEDIUM or LONG. The use of
supplementary services requires a flash signal of a specific length.
You can obtain information about available supplementary services
and the required flash time from your telephone service provider.
- CHANGE PIN: in delivery state, the system PIN is set to "0000".

Handset settings

1. In idle state press the menu key
2. Select HS SETTINGS and press
3. Select from the options and press
- ALARM: select ON or OFF. If ON is selected, enter the time and
switch the Snooze function on or off. Press
- RING SETUP: select INT. RING. for internal calls or EXT. RING. for
external calls and select a melody. Press
Select RING VOLUME and set the ringer volume (1 ... 5, OFF).
- TONE SETUP: select KEY TONE, BATTERY TONE or OUT OF
RANGE and switch each tone on or off. Press
28
.
.
.
.
.
.
.
after each step.
after each step.
, select
.
after each step.