Card Reader For Myintercom Plus - behnke myintercom One Anleitung

card reader for myintercom Plus

5.
You have the option to buy the myintercom
Plus IP video door intercom with an integrated
card reader. This feature enables you to realize
access control in an easy way, by handing out
RFID cards registered with the door intercom
station to authorised persons. By presenting a
registered card to the card reader, relay 1 will
activate and switch the open door function.
Overview display
Displaying the tens digit of the current
memory position ( ;
10
; ; ... )
1.2 1.3 9.9
Displaying the ones digit of the current
memory position (starting at
This decimal point indicates the hundreds
digit. Starting from memory position 100 the
left decimal point will turn on (e.g. "
153) For memory positions from 0 to 99, the
decimal point will not light up (e.g. "
53).
This decimal point indicates, whether the
current memory position is in use or not
(e.g. " ": memory position 138 is used for
3.8.
a transponder).
www.behnke-online.de
; ; ... ; ;
20 30 90 1.1
up to )
0 9
"for
5.3
" for
5 3
Instructions myintercom Plus IP video door intercom
Card reader for myintercom Plus
When the display is flashing, changes can be
implemented.
Other operational displays:
The transponder presented to the detection
zone still needs to be programmed.
Error!
The card reader does not work flawlessly, an
internal error occured. Please send in the door
intercom for repair.
GB
68