Commissioning; Suggested Installation Position; Illumination; Determine The Camera Position - behnke myintercom One Anleitung

Instructions myintercom Plus IP video door intercom
GB

Commissioning

commissioning
2.

2.1. Suggested installation position

To ensure a perfect view from the camera, we
suggest installation of the device at 155 cm
above the ground. Please see the illustrations
for additional information. Please note the
horizontal and vertical aperture angle of the
camera included in your myintercom (cf. chapter
"7. Technical Specifications" on page 83)
50 cm
53

2.2. Illumination

To improve the image feed when illumination is
poor or at night, we suggest installation of an
outdoor light.

2.3. Determine the camera position

Please note the following advice on camera
position when installing your Behnke door
intercom system: In order to receive an image
feed, you need a lot more than to simply point
the camera in the direction of an object or a
person. The lighting situation, the camera's
angle of view (horizontal / vertical), reflectance
from other light sources and sunlight, back
lighting and blind spots all have an influence
on your future image quality. It is important that
you avoid direct sunlight, as the camera shutter
will reduce light incidence into the camera and
consequently will reduce the image sensor
performance. Therefore, try to have the sun
behind the camera when choosing your camera
position. In order to prevent problems from
back lighting when filming objects or people,
you should consider changing the surrounding
area by changing the camera position. Where it
proves to be impossible to change the camera
position, the object or person in question
should be sufficiently lit from the front.
www.behnke-online.de