TIPS AND RECOMMENDATIONS
GB
1.3
Limitation of Liability
All of the information and notes in these instructions have been compiled in accordance
with applicable standards and regulations. They reflect best engineering practice and
our years of experience.
The manufacturer accepts no liability for damages in the following instances:
The actual scope of supply may differ from the explanations and illustrations in these
instructions following the incorporation of new technical changes. The obligations
stipulated in the supply agreement, our general terms and conditions of business, the
manufacturer's terms and conditions of supply and the statutory regulations in force at
the time of conclusion of the contract will apply.
1.4
Copyright
The contents of these instructions are protected by copyright. They may be used in
connection with the operation of the system. Any other use above and beyond the
aforementioned is only permitted with the written consent of the manufacturer.
1.5
Spare parts
INFORMATION!
This symbol highlights useful tips and recommen-
dations, together with help for ensuring efficient
and trouble-free operation.
• Failure to observe these instructions
• Where used for a purpose other than that intended.
• Operation by untrained staff
• Unauthorised modifications
• Technical modifications
• Use of unlicensed spare parts
WARNING!
Risk of injury from using incorrect spare parts!
The use of incorrect or defective spare parts can
result in risks for the operating staff and in
damage, malfunction or total failure of the
system.
• Only use original spare parts from the
manufacturer or spare parts authorised by the
manufacturer.
• Always consult the manufacturer if in doubt.
LOSS OF WARRANTY
The manufacturer's warranty lapses if
unauthorised spare parts are used. Spare parts
can be obtained from registered stockists or
straight from the manufacturer. See Section 1.7
Customer Service in this manual
28