1.6
Warranty conditions
All products supplied by TESCOM EUROPE GMBH & CO. KG carry a 24 month war-
ranty. If toxic or corrosive gases are used, the warranty period is reduced to six months.
Please also refer to the section "Warranty" in our business conditions on the delivery
note. You will find the manufacturer's address on the last page of these instructions for
use.
1.7
Customer Service
Our customer service is available to provide technical information:
Tescom Europe GmbH & Co. KG • An der Trave 23-25 23923 Selmsdorf
ADDRESS
Tel +49 38823 31-0 • Telefax +49 38823 31 -199
Internet www.tescom-europe.com
Email eu.tescom@emerson.com
Please do not hesitate to provide us with information and experiences gained through
use; we welcome any valuable input that will help to improve our products.
2
Safety
This section provides an overview of all the important safety aspects to ensure the
protection of your staff and the safe and trouble-free operation of the equipment. Further
safety information relating to specific tasks can be found in the sections on the individual
life cycle phases.
2.1
Intended use
Pressure regulator types SG1, SG2 and SG3 are exclusively for use as
pressure regulators in pipes, outlets or cylinders to reduce input pressure
where the outlet pressure is independent of the flow.
Intended use also includes compliance with all the information in these instructions.
Any use other than, or above and beyond, the intended use constitutes improper use.
WARNING!
Danger from improper use!
Improper use of the system can produce
dangerous situations.
• Do not use the pressure regulator as a flow
control element or as a shut-off valve.
• Check that the medium is compatible with
the materials of the pressure regulator.
29
GB