Basic Operation - auna multimedia 10029401 Bedienungsanleitung

Listening from AUX IN jack
1 . Connect the Aux out jack from the external audio player (such as
DVD player, TV, VCR ...etc.) to the AUX IN jacks on the rear of tower
speaker by the supplied RCA connection cable as the figure below:
2 . Connect the tower speaker to the power as previous procedures .
The Standby indicator will turn on.
3 . Press the POWER button on the tower speaker or remote control
to power on the tower speaker .
4 . Press the SOURCE button on the unit repeatedly or the remote
control to turn to AUX mode .
5 . Power on the connected external player and start playback as
usual .
6 . Press the volume buttons to adjust volume level .
7 . Press the TREBLE buttons on the Remote Control to adjust treble
as desired .
8 . Press the BASS buttons on the Remote Control to adjust BASS as
desired .
9 . Press the EQ preset mode buttons MUSIC; MOVIE or VOICE to turn on the preset EQ effect as
desired .
10 . Press the MUTE button to turn off the sound, press again to resume.
11 . When finished listening, press POWER button on the tower speaker or remote control to power Off
(standby mode) the speaker.
Listening from 3.5mm LINE in jack
1 . Connect the headphone/earphone; LINE OUT jack from the
external audio player such like MP3 player; Discman ... etc) to the
LINE IN jacks on the rear of tower speaker by the supplied Line In
connection cable as the figure below:
2 . Connect the tower speaker to the power as previous procedures .
The Standby indicator will turn on.
3 . Press the POWER button on the tower speaker or remote control
to power on the tower speaker .
4 . Press the SOURCE button on the unit repeatedly to turn to LINE
mode .
5 . Power on the connected external player and start playback as
usual .
6 . Other operations are same as AUX IN mode .

Basic Operation

8. Press the BASS button
9. Press the EQ preset mo
preset EQ effect as des
10. Press the MUTE butto
11. When finished listenin
(2) Listening from
(1) Listening fro
Remote Control to pow
CHARGING PORT
8. Press the BASS but
DC 5V
9. Press the EQ prese
preset EQ effect as
10. Press the MUTE b
11. When finished liste
Remote Control to
(2) Listening fro
CHARGING PORT
DC 5V
19
CHARGING PORT
DC 5V
6
7
1
2
3
4
5
6