Setting The Clock; Setting Sleep Timer; Setting The Alarm - auna multimedia 10029401 Bedienungsanleitung

Saving a Radio Station
1 . Follow the instructions for tuning the FM radio .
2 . After tuning to the desired station, press the MEM/CLOCK button .
3 . Press the MEM/CLOCK button to save the current radio station to the selected preset . Here are 30
stations can be saved to the tower speaker's memory.

Setting the clock

1 . Press the POWER button to switch off the unit.
2 . Press and hold 3 seconds the POWER button on the remote control or unit to select 12 or 24 hour .
3 . Press and hold 3 seconds MEM/CLOCK button on the remote control to set the time .
4 . Press the TUN+/CLOCK + or TUN-/CLOCK- button on the remote control to adjust up or down the
hour .
5 . Press MEM/CLOCK button again on the remote control to confirm the setting and it will automati-
cally go to minute setting.
6 . Press the TUN+/CLOCK + or TUN-/CLOCK- button on the remote control to adjust up or down the
minute .
7 . Press MEM/CLOCK button again on the remote control to confirm the setting.

Setting SLEEP timer

1 . Press the POWER button to switch on the unit .
2 . Press the SLEEP button repeatedly to select the preset set timer. Time presets available are 5, 10,
15, 30, 60, 90 minutes .
3 . After the set sleep time has expired, the tower bar will automatically power off.

Setting the alarm

1 . Press the POWER button to turn the tower speaker on .
2 . Press the POWER button and select the FM mode on the remote control . Press the TUN+/CLOCK +
or TUN-/CLOCK- button to select the desired radio frequency.
3 . Press the POWER button on the remote control to switch off the power.
4 . Press and hold 3 seconds the ALARM button on the remote control to set the alarm .
5 . The time on the LCD display will begin blinking.
6 . Press the TUN+/CLOCK + or TUN-/CLOCK- button on the remote control to adjust up or down the
hour .
7 . Press MEM/CLOCK button again on the remote control to confirm the setting and it will automati-
cally go to minute setting.
8 . Press the TUN+/CLOCK + or TUN-/CLOCK- button on the remote control to adjust up or down the
minute .
9 . Press the ALARM button again on the remote control to confirm the setting.
10 . After the set sleep time has expired, the ALARM will ring the preset radio .
11 . Press the ALARM button on the remote control to switch on or off the alarm setting.
21