Setting Up For Operation - auna multimedia KaraBanga Anwendungshinweise

Setting up for Operation

Connecting power
Plug the supplied AC adapter into the DC jack on the rear side of the unit and connect to a standard AC
wall socket with 230V~ 50 Hz continuous power supply .
Note: When the unit is not operated for long periods of time, unplug the AC adapter from
the unit and wall outlet.
Battery operation
Notes: Disconnect AC adapter before installing batteries
1 . For best performance and longer operating time, we recommend the use of alkaline batteries .
2 . Remove the BATTERY DOOR (#21) on the back of the unit . Follow the polarity diagram shown in the
BATTERY COMPARTMENT to insert 8 X 'C' size (UM-2) batteries and close the door .
27