Herunterladen Inhalt Inhalt Diese Seite drucken

auna multimedia 10029401 Bedienungsanleitung Seite 20

Karaoke-tower
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Setting up BT pairing
Initial pairing
1 . Switch on the tower speaker . Press the SOURCE button and select BT .
2 . The BT LED will blink non-stop in searching for device .
3 . When a device is found, it will show the name "HiTower" If the device require a password, enter
„0000" to pair with the tower speaker .
Re-pairing
1 . Switch on the tower speaker . Press the SOURCE button and selectBluetooth mode .
2 . The BT LED will blink 3 seconds and it is automatically finding the last device it was paired with.
When the device is found, it can play back directly.
3 . If there is no device found, the bluetooth LED will continue to blink non-stop . Enter password to
start with or press SOURCE button to select FM, AUX in or LINE in .
BT setup note
1 . The BT speaker only connects to device at a time. Turn off the BT speaker in order to pair the
device with another Bluetooth device .
2 . The maximum transmission between the Bluetooth speaker and a device is 10 meters or 32 feet .
3 . Interference may occur during playback when using the BT function near other wireless devices. If
playback through Bluetooth is problematic, move the Bluetooth speaker and the playback device to
a different location, or use the 3.5mm audio cable jack instead of the BT function.
Listening and setting up FM radio
FM Antenna
Adjust the FM Wire Antenna (included) to get the best reception signal .
Tuning the FM radio
1 . Press the POWER button to turn the tower speaker on .
2 . Press the SOURCE button to switch to FM radio mode .
3 . Press the TUN+/CLOCK+ or TUN-/CLOCK- buttons on the remote to tune the FM radio .
4 . Press and hold TUN/MEM button 3 seconds on the remote control to switch auto-seraching radio
stations. After finish searching, it will automatically save those stations.
Listening to a saved radio station
1 . Press the POWER button to turn the tower speaker on .
2 . Press the SOURCE button to switch to FM radio mode .
3 . Press the TUN/MEN button on the remote control to cycle through saved radio stations.
20

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10029400

Inhaltsverzeichnis