Introduction; Intended Use; Features; Package Contents - Parkside PFS 710 D3 Originalbetriebsanleitung

SABRE SAW PFS 710 D3

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is designed for sawing, cutting to
length and adapting wood, plastics and construc-
tion materials. The sabre saw is suitable for rough
sawing work, straight and curved cuts and cuts off
surfaces flush. Heed the information concerning
saw blades and practical advice on sawing. Any
other uses of or modifications to the machine are
deemed to be improper usage and may result in
serious physical injury. The manufacturer accepts
no responsibility for damage(s) attributable to
misuse. This appliance is not intended for commer-
cial use.

Features

Stroke rate adjusting wheel
Locking switch
ON/OFF switch
Handle
Footplate
Saw blade
Quick-release chuck
Work light
Locking lever for footplate
Cover for carbon brushes
Release button
Saw blade for wood
Bimetal saw blade

Package contents

1 sabre saw PFS 710 D3
1 saw blade for wood HCS 152 mm
1 bimetal saw blade 152 mm
1 set of operating instructions
■ 2 │ GB

Technical data

Rated voltage:
Rated power
consumption:
Rated idle speed:
Stroke length:
Max. cutting
performance:
Sawblade mounting:
Protection class:
Noise emission value:
Noise measurement value determined in accor-
dance with EN 60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 60745:
Total vibration value:
Cutting boards: a = 9.8 m/s
h,B
Uncertainty: K = 1.5 m/s
Cutting wooden beams: a
Uncertainty: K = 1.5 m/s
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
230 V ~ , 50 Hz
(AC)
710 W
n 0–2800 rpm
0
20 mm
Wood 160 mm
Aluminium 18 mm
Metal 8 mm
1 / " (12.7 mm)
2
II / (double insulation)
L = 88 dB(A)
PA
K = 3 dB
L = 99 dB(A)
WA
K = 3 dB
2
2
= 12.1 m/s 2
h,WB
2
PFS 710 D3