Private Exchanges; Using Pause - switel D6020 Bedienungsanleitung

- Private exchanges -

7 Private exchanges
If you have connected your telephone to a PBX, you can use all the special
functions such as call forwarding and automatic call-back. These can be
accessed using the "R" button. For a PBX, a FLASH time of 90 ms (FLASH 1,
factory setting) or 250ms (FLASH 2) is required (Adjustment, see 8.11). To
check whether your telephone will function correctly with your PBX, consult the
supplier of the PBX.
7.1

Using Pause

With private exchanges, it is necessary to dial a certain number (e.g. "9" or "0")
in order to obtain a dialling tone for an outside line on the extension. With some,
older private exchanges, it takes some time before the dialling tone can be
heard. Especially for these private exchanges, an automatic pause can be
inserted after connecting to the outside line so that you can dial directly without
waiting for the dialling tone.
Entering a pause when dialling manually
Press the redial button once between the number for the outside line and the
actual telephone number. After connecting to an outside line your telephone will
wait for 3 seconds before dialling the actual telephone number.
The pause can also be saved with numbers in the phone book.
147