Keypad Lock; Temporary Tone Dialling; Paging From The Base Station To The Handset - switel D6020 Bedienungsanleitung

Deleting all redial numbers
To delete all numbers from the redial list, proceed as follows:
1. Press the
2. Hold the
display.
3. Confirm with the menu button
deleted from the redial list.
4.11

Keypad lock

If you frequently carry the handset with you, you can lock the keypad so that
buttons are not pressed unintentionally. Incoming calls can be received as
normal when the keypad lock is switched on.
Activating the keypad lock
Press the button on the handset for three seconds. The
appear in the display.
Deactivating the keypad lock
To deactivate the keypad lock, press the
Note: The keypad lock can also be activated via the menu.
4.12

Temporary tone dialling

If you can only use your telephone in Pulse Dialling mode, you do not have to
forego the facilities of Tone Dialling (e.g. interrogating an answering machine).
You can change temporarily to Tone Dialling during a call by means of the
button. PULSE dialling will be reselected at the end of the call.
4.13

Paging from the base station to the handset

If you cannot remember where you have left the handset, press the
on the base station. You will hear the handset audible signals for 30 seconds
and thus be able to find it again easily. You can cancel the audible signals earlier
by pressing any button on the handset or the
138
- Operation -
button.
button pressed until DELETE ALL? appears in the
and the telephone number will be
button twice.
button on the base station.
symbol will
button