Silvercrest SKV 1200 B2 Bedienungsanleitung Seite 32

■ 26 │ GB │ IE
A Blade holder
B Sealing ring
C Blender jug
–
For improved stability, remove the blender
lid r by turning it anticlockwise until it
disengages from the catch on the blender t
and then pull it upwards and off .
–
Turn the appliance upside down and turn
the blade holder A anticlockwise as far as
the stop using the two handles supplied for
this purpose . Now pull the blade holder A
directly upwards and out .
WARNING! RISK OF INJURY!
► Always handle the blades z carefully .
They are very sharp .
–
Pull the sealing ring B from the blade
holder A .
■ Now you can clean all the parts (blender jug C,
blade holder A the blade z and sealing ring B)
in warm water with a little washing up liquid
using a washing up brush . Afterwards, rinse all
the parts with clean water so that no detergent
residues remain .
NOTE
► The blender jug C and the measuring cup e
are dishwasher-safe .
If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere . This may cause
them to become deformed . We recommend
using the top rack of the dishwasher and a
washing programme with max . 45°C .
■ After cleaning, reassemble the blender:
–
Push the sealing ring B back into the recess
on the blade holder A with the blade z .
–
Place the blade holder A with the blade z
back into the blender jug C so that the
blade z protrudes into the blender jug C .
Note the corresponding slots on the blender
jug C .
–
Turn the blade holder A clockwise as far
as possible so that the blade holder A sits
firmly on the blender jug C again .
SKV 1200 B2