Klarstein Windwalker Smart Bedienungsanleitung Seite 62

EN
62
Emergency operation
• If the remote controller is lost or
broken, use force switch button to
operate the air conditioner.
• If this button is pushed with the unit
OFF, the air conditioner will operate
in Auto mode.
• If this button is pushed with the unit
ON, the air conditioner will stop
running.
­Airfl ­ ow­direction­adjustment
1. Use up-down swing and left-right
swing buttons on the remote controller
to adjust the airfl ow direction. Refer
to the operation manual of the remote
controller for detail.
2. For models without left-right swing
function, the fi ns has to be moved
manually.
CAUTION
Risk of injury! Move the fi ns before the unit is in operation, or your
fi nger might be injured. Never place your hand into the air inlet or
outlet when the air conditioner is in operation.
Specifi ­ c­caution
1. Open front panel of the indoor.
2. The connector (if required) can not
touch the terminal board, and is
positioned as shown in the fi gure.
Force switch
Connector
Cabel 1
Cabel 2
Terminal board