Silvercrest SLXL 20 A1 Bedienungsanleitung Und Sicherheitshinweise Seite 34

To connect further Bluetooth
♦ Switch on the speaker and press the button
pairing mode and can be connected to another Bluetooth device .
NOTE
► If you do not establish a connection between the speaker and your
Bluetooth
automatically . In this case, you will have to switch the speaker back on
before restarting the pairing process .
If the speaker stops receiving a signal while in Bluetooth
►
speaker will switch off automatically after 10 minutes .
► The next time you turn on the speaker, it will connect automatically to the
last-connected Bluetooth
reconnect to the speaker automatically, you will have to re-establish the
connection manually . A detailed description of how to do this can be found
in the operating instructions for your Bluetooth
If you want to connect the currently connected speaker to another Bluetooth
►
device, start by pressing the button
connected Bluetooth
deactivate the Bluetooth
device . You will hear a beep and the operating/charging LED
alternatively orange and blue . The speaker is now ready to be paired with
another Bluetooth
SLXL 20 A1
®
® device within 3 minutes, the speaker will switch off
device . If your Bluetooth
®
® device from the speaker . Alternatively, you can
function on the connected Bluetooth
®
® device .
devices, proceed as follows:
. Now, the speaker is in
® device .
to disconnect the currently
® mode, the
® device does not
®
®
will flash
GB │ IE │ 31 ■