Battery And Charger - SoFlow SO6 Originalbetriebsanleitung

WARNING!

3.4 Battery and charger

The engine of your SO6 is powered by a lithium-ion battery. The SO6 has to be fully charged before its first use. Only
charge the battery in a dry and clean environment. Plug one end of the charger into the socket and then the other end into
your SO6. Now a red light appears which indicates the battery level. The battery is now charging. The first charging cycle
can take up to five hours. The charger will stop the charging process automatically, once the battery has been fully
charged. This is indicated by a green light. When the light changes from red to green, first unplug the charger from the
socket and afterwards from the SO6. Please note that the battery is fully charged as soon as the display shows five bars,
even though one bar seems to be missing.
Do not charge the SO6 without supervision and remove the charger when the charging process is completed.
Never use any other charger than the original one which is delivered with the SO6.
Should you encounter any difficulties during the charging process, please contact your retailer.
If the SO6 is barley used, we recommend to recharge the battery monthly, to ensure its longevity. Before a long pause of
usage, we recommend to fully charge the battery.
17