Herunterladen Inhalt Inhalt Diese Seite drucken

Mobile Phone Holder; Battery And Charger - SoFlow SO1 Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
Folding up and down and instructions for the safety lock
1. Unfolding: Make sure that SO1 is turned off before folding or unfolding it. Put the front bar in an upright position. The safety bolt must engage automatically and audibly. Before each journey,
make sure that the bolt is properly engaged. Never ride if there is a problem with the safety bolt!
2. Folding: Turn the safety bolt counterclockwise to pull it out easily. Now fold the scooter and attach the hook from the front bar with the mechanism on the mudguard. Now you can pick up
the SO1 on the front bar.

3.3 Mobile phone holder

Your SO1 comes with a mobile phone holder which can be easily attached or detached. Simply wrap the strap around the handlebar, pull it through the buckle and make sure it is firmly secured.
You can pull around the mount to check if your mobile phone is firmly held in place. The stretchable silicon bands can hold all smartphones with a screen size from 4 to 6.2 inches.
WARNING!

3.4 Battery and charger

The range of the battery may differ from the specifications depending on the temperature, the condition of the track, the incline and the weight of the driver.
Charging the battery
Make sure that the charging connector and the charger are dry and that the SO1 is switched off. Connect the charger cable to the scooter's charging connector and plug it into an electrical outlet.
The charging light on the charger should glow red. When the charging light changes from red to green, the battery is fully charged. Disconnect the charger from the power source and the scooter.
The e-scooter should only be charged with the original charger. Ensure that the voltage supply is correct. Do not use the charger if the charger or power cable are damaged. Please contact the
service department. For optimum battery life, charge and store the e-scooter in a dry and clean environment, preferably room temperature. The charging time of the scooter is approximately 4-
6 hours. There will be negative effects on the battery life if the charger remains permanently connected to the scooter and the power source.
Battery handling
Do not cover the scooter or the charger during charging. Lithium batteries have different freezing points depending on their charge level. If a battery cell freezes, it is irreparably destroyed and
the entire battery must be replaced. As with conventional batteries, a lithium battery loses up to 40% of its capacity starting from approximately 0°C. At approximately 20°C and 100% charge, a
lithium battery loses approximately 30% of its capacity per month (poor storage conditions).
copyright by www.soflow.com
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

3492711

Inhaltsverzeichnis