TROUBLESHOOTING
Problem
E0
E1
E2
E4
E5
E6
E9
EE
For any further questions, please do not hesitate to contact our service department.
Thank you.
Mögliche Ursache
Safety switch off
Abnormal speed
Overload
Motor not connected
Communication error
Power tube or relay is not turned
on
Line verification error
Electronic EEPROM read/write
error
Lösung
Please turn on the safety switch
Please restart the treadmill.
Please restart the treadmill.
Please check the cable connec-
tions of the motor
Please check all cable connec-
tions and restart the treadmill.
Check the power supply.
Please contact manufactor.
Please contact manufactor.
63