Troubleshooting - AsViva T21 Benutzerhandbuch

Error code
E-01
2. the electronic meter or the lower
1. The power tube on the lower cont-
E-02 rol panel is shorted or damaged.
The power line of the motor is not
connected well or the carbon brush
E-04
on the motor is loose to cause poor
E-05 Overcurrent, overload protection
1. The security switch is not placed
E-07
2. Reed switch is not connected or
In case of faults please remove the power supply for a few seconds.
If the error persists, please contact our service department.
If you have any questions about your fitness equipment, our staff will help you.

TROUBLESHOOTING

Problems
1. the communication line is
damaged or connected badly;
control panel is damaged
2. Burst
connection
in the designated position.
damaged
Solutions
1. Check if the connection of the upper and lo-
wer communication lines is good or damaged;
2. Replace the electronic watch or the lower
control panel.
Check if the power tube on the lower control
panel is damaged or replace the lower control
panel.
Check if the motors power line is well connec-
ted or check if the motors carbon brush is well
connected
Restart the treadmill
1. Check that the security switch is placed in
the designated position.
2. Check if the reed sensor is connected or
not.
3. Replace the reed switch.
43