Cleaning Mode Selection - Philips FC8832 Bedienungsanleitung

Cleaning mode selection

2 The start/stop button is continuously on and the robot starts cleaning.
3 The robot cleans in the auto-cleaning mode until its battery runs low. In
the auto-cleaning mode, it follows repeated sequences of Z-pattern,
random, wall-following and spiral patterns.
Note: You can select individual cleaning modes in the app (see 'Cleaning
mode selection').
4 When the battery runs low, the start/stop button turns orange and the
robot searches for the docking station to recharge.
5 You can also press the start/stop button to interrupt or stop the cleaning
run. If you press the start/stop button again and there is still enough
energy in the rechargeable battery, the robot continues cleaning in the
auto-cleaning mode.
6 To make the robot return to the docking station before the rechargeable
battery runs low, select docking in the app. All icons on the display of the
robot disappear except for the docking icon, which lights up bright blue
while the robot returns to the docking station.
Next to the auto-cleaning mode, this robot has four individual cleaning
modes. These cleaning modes can be selected in the app. You can also
activate the cleaning modes by pressing the appropriate button on the
robot.
English
15