Philips FC8832 Bedienungsanleitung Seite 12

English
12
WiFi specifications
What to do if connecting app to robot fails
5 Select SmartPro Active and follow the instructions in the app.
6 The app will tell you when the robot is connected.
7 Press 'Start using your Philips robot vacuum cleaner' to open the app.
8 Press 'Start cleaning' to start the robot. You can press 'Return to charging
base' to make the robot return to its docking station.
- The robot is designed to be connected to standard consumer routers
that use WEP, WPA-PSK, WPA2-PSK encryption keys, or no encryption
(open WiFi network).
- Connecting the robot to public hotspots, office networks or hotel
networks is not possible in most cases.
- The robot will not work with 5 GHz routers. If you encounter problems
with connecting the robot to the router, please check if your router can
also be changed to the 2.4 GHz setting.
The app will tell you what to do if connection fails.
If you are still unable to connect the app to the robot with the instructions in
the app, start all over again with the steps in 'Connecting WiFi router and
robot'.
If you continue to have problems with connecting the robot to the app,
contact the the Philips Consumer Care Center in your country or go to
www.philips.com/support.