Endress+Hauser FQG61 Einbauanleitung Seite 6

Proximity switch
Re-assembly
Re-assembly has to be done in reverse order.
Please obey the following steps:
1
Grease the thread in the hood with Silicone sealing compound (e.g. MOMENTIVE_RTV162).
Screw the proximity switch into the hood, observe the distance of 62±0.3 and fasten the counter nut.
The screw at the ground connection is longer.
If necessary shorten the cable. Dismantle cable 40 mm and strip the wires 8 mm.
Terminal assignment
1 2 3 4
1,2 Proximity switch for "EIN/ON" switch position
3,4 Proximity switch for "AUS/OFF" switch position
6
62
±0.3
(14.5 )
(14.5
±0.2
FQG6x_Initiator9
FQG6x_Initiator10
2
)
±0.2
3
40
4 mm
FQG6x_Initiator12 FQG66_Initiator15
Endress + Hauser