Silvercrest IAN 290990 Gebrauchsanleitung Und Sicherheitshinweise Seite 62

After the full-screen display, the last measurement result saved
will be displayed. If no measurement has been saved, the de-
vice will display the value of „0".
The cuff will inflate automatically. The cuff air pressure is
released slowly. If a tendency towards high blood pressure
has been detected, it will be repressurised and the cuff pres-
sure will be increased once more. As soon as a pulse has
been detected, the pulse symbol
The measurement results for systolic pressure, diastolic pres-
sure and pulse will be displayed.
You can stop the measurement at any time by pressing
the START / STOP button
If the measurement has not been carried out correctly,
„Er_" will be displayed. Also take a look at „Trouble-
shooting" and repeat the measurement process.
The measurement result will be saved automatically.
If you have activated Bluetooth
will be transferred. The blood pressure monitor displays
the symbol for Bluetooth
the blood pressure monitor off by pressing the START /
STOP button once more.
To power down press the START / STOP button
note: The device switches off automatically after one
minute if no button has been pressed. Wait for at least
5 minutes before taking another measurement!
62 GB/IE
will be displayed.
.
8
data transfer, the data
®
transfer during transfer. Switch
®
.
8