Menus And Settings; Video Mode - NextBase NBDVR402G Bedienungsanleitung

MENUS AND SETTINGS

Each mode (Video, Photo and Playback) has a menu used to access the various options and settings, press the
MENU button on the rear of the device to access the menu, specific to the current mode selected.
Use the UP, DOWN buttons to select chosen option and press the OK button to confirm.
1.

VIDEO MODE

1.1 Resolution
Select recording resolution, this will increase or decrease the quality of the recorded video.
Default Setting: 1080P (1920x1080 @ 30Fps)
1.2 Exposure
Select exposure, used to adjust exposure level for different light conditions.
Default Setting: 0
1.3 White Balance
Adjust the white balance for different light conditions.
Default Setting: Auto
1.4 Record Audio
Turn On / Off audio recording.
Default Setting: On
1.5 Date Stamp
Turn On / Off the date stamp shown on recorded files.
Default Setting: On
1.6 Loop Recording
Select duration of recording length for the individual video files, the iN-CAR CAM will fill the SD Card then loop
back to the beginning, overwriting the saved files (unless protected).
Default Setting: 3 Minutes
1.7 G Sensor
Turn Off or adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which will automatically
protect the current recording in event of a collision.
Default Setting: Middle
1.8 Motion Detection
Turn On / Off the motion detection function, the device will need to remain on and will start a 10 second
recording when a change to the viewed scene is detected.
Default Setting: Off
1.9 Number Plate
Enter the registration number for your vehicle, this will then be shown on the video file.
Default Setting: ********
1.10 Driver Fatigue Warning
Set the timer which will display an image of a hot beverage to serve as a reminder to take sufficient rest
when on a long journey.
Default Setting: Off
1.11 GPS Track
Turn On / Off the GPS co-ordinate stamp shown on recorded files, co-ordinates and map will function as
normal when viewed with the Driving Recorder Player no matter whether this function is set to On or Off.
Default Setting: On
1.12 Compass
When turned on, the screen will display current speed and a compass after the selected period of time,
press any button to return to normal viewing, this function is only available when a GPS connection is present.
Default Setting: Off
1.13 Password Settings
Set a password that will need to be entered to access menus and settings, only basic functions of power
on / off and start / stop remain available.
1.13 Speed Units
Select whether to record and display speed in KMH or MPH.
Default Setting: MPH
1.14 Rotate Display
Rotate the display 180
button functions do not rotate.
°, particularly useful should iN-CAR CAM be mounted on the dashboard, the control
13